Our 20 amp 3 phase isolator is a part of our new range of Industrial Switchgear – IMPACT S Series isolator switches.
First of all, the IMPACT S Series is built tough for harsh Australian conditions and made from premium impact and chemical resistant polycarbonate material. In fact, all of our industrial switchgear is tested to achieve an IP66 protection rating.
Another feature of the IP66 IMPACT S isolator switches is that they are 3/4 size. They feature a new curved design that is unique to the IMPACT S Series and as a result, they stand out as different to all other isolators on the market today. All amperages of the switch disconnectors are equipped with 4 x M25 conduit entries so that you have options when running cables to the unit. Whereas the 63 amp model comes equipped with 2 x 32mm and 2 x 25mm entries.
- Lockable toggles with ON/OFF identification
- Laser identification markings
- 4 x M25 conduit entries
- New Curved Design
- 3/4 Size
- Silicone based seals
- Screw caps and conduit adaptors included
Technical Parameters (IP66 isolator switch):
- Three Pole
- Amperage: 20amp
- Voltage: 500V AC
- Frequency: 50/60Hz
- Operating Temp: -40°C – 80°C
- IP Protection: IP66
- Utilisation Category: AC-22A
- Complies with AS/NZS60947.3:2018 60947.1:2015
- SAA Certification
So it doesn’t matter if you require single phase or three phase, we have configurations to suit your needs. These switch disconnectors are available in a number of amperages, 20 amp to 63 amp, because who doesn’t like options?
Connected Switchgears’ IMPACT S Series has a range of optional extras so that your job as the electrician is easier. The phase indicator kit (PCB-KIT) identifies the active phases. Our circuit labeling kit (IDLABEL-KIT) is used for circuit identification. Perhaps you’ve never installed a phase indicator kit before. For that reason, we’ve created a short ‘How To’ video. See how it’s installed here!
So why not put the IMPACT S Series to the test and purchase the 20 amp 3 phase isolator (IS320-S) today!